BOC242 Cylindrical Bluetooth Speaker (10W)

Manual

BOC242 Cylindrical Bluetooth Speaker (10W) User Manual(English）

BOC242 Cylindrical Bluetooth Speaker (10W) User Manual(Spanish）

FAQ

Q1: How to use FM radio mode?
A1:

1. Connect the included 3.5mm audio cable.

2. Press the ON/OFF button to switch to FM mode.

3. In FM mode, press the Play button to start automatic station scanning.

4. For better reception, place the speaker near a window to reduce indoor interference.

Q2: How to pair in TWS (True Wireless Stereo) mode?
A2:

1. Turn on both speakers and keep them in Bluetooth mode (do not pair with a phone).

2. Double-click the ON/OFF button on each speaker.

3. A sound prompt will indicate entry into TWS pairing mode.

4. Another prompt will confirm successful pairing.

5. Hold down the power button on one speaker to turn off both at the same time.

6. To disconnect TWS, double-click the ON/OFF button on either speaker again.

Q3: What audio formats and storage devices are supported?
A3:

• Supported formats: MP3 and WMA.

• Supported devices: USB drives and TF cards up to 64GB

• If there are many files or the device has high capacity, wait for the speaker to finish scanning.

Q4: How to adjust volume and switch tracks?
A4:

• Short press the volume button to adjust volume.

• Long press the volume button to switch tracks.

Q5: What should I do if the speaker won’t turn on?
A5:

1. Make sure the speaker has power and press and hold the power button in the center of the panel for 3 seconds to turn it on.

2. Connect it to the charger and let it charge for one hour before trying again.

3. Disconnect the 3.5mm cable, TF card, and USB from the speaker, then try turning it on again.